Ospf commands cisco
- show ip ospf commands
- sh ip ospf commands
- show ip ospf neighbor command
- show ip ospf rib command
Ospf commands cisco packet tracer
Show ip ospf neighbor command.
Show IP Route OSPF Command on CISCO Router/Switch
Command
Show IP Route OSPF
Use
Allows you to see just the OSPF routes installed in the routing table.
Syntax
Router#show ip route ospf
Example
This example demonstrates the show ip route ospf command.
First, here’s the full routing table for R2.
R2(config-if)#do sh ip route Codes: C – connected, S – static, R – RIP, M – mobile, B – BGP D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2 E1 – OSPF external type 1, E2 – OSPF external type 2 i – IS-IS, su – IS-IS summary, L1 – IS-IS level-1, L2 – IS-IS level-2 ia – IS-IS inter area, * – candidate default, U – per-user static route o – ODR, P – periodic downloaded static route Gateway of last resort is not set 1.0.0.0/32 is subnetted, 3 subnets R 1.1.1.1 [120/1] via 10.1.1.1, 00:00:15, FastEthernet0/0 R 1.3.3.3 [120/1] via 10.1.1.1, 00:00:15, FastEthernet0/0 R 1.2.2.2 [120/1] via 10.1.1.1, 00:00:15, FastEthernet0/0 2.0.0.0/32 is subnetted, 1 subnets C 2.2.2.2 is directly connected, Loopback0 33.0.- show ip ospf database command explained
- show ip ospf interface command